Bicycle Drives - Save on Mobility
CONTACT SILESIA GROUP INC  http://www.biznetmall.com/bicycle-drives/
Cheapest Transportation on Earth - 200 miles / gallon +
There are 3.785411 liters per gallon (US)     1.61 KM = 1 MI - you can make 322 km  on  3.785411 liters =  85 + kilometers on 1 liter of gasoline!

Bicycle Drive Kit FDR 398
Tanaka Engine Model PF 4000, 39.8cc, 2.20 HP, Two Cycle Bicycle Engine, 281-13

Orders At:  http://www.biznetmall.com/bicycle-drives/

Tanaka Engine Bike Drive Tanaka Engine Bike Drive
Click over image to enlarge

FDR-398-100 Tanaka PF-4000 39.8cc 2.20 HP Two Cycle Engine, use a 50 to 1 mix ratio.

FDR-398-100 Tanaka PF-4000 39.8cc 2.20 HP Two Cycle Engine, use a 50 to 1 mix ratio.
Click over image to enlarge
Product ID: 3980
Weight: 19 lbs
Tanaka Engine
Available with 1", 1-1/8", 0.930", 1.32", 1.34" & 1.50" Roller

Smaller drive rollers have more pulling power less top speed. Larger drive rollers have a faster top speed but less low end pulling power.  It also depends on the weight of the rider, engine size and power and riding conditions – road condition.

Drive roller stock sizes:  7/8" or .930", 1",  1-1/8”, 1-¼” or 1.25, 1.34” & 1.50"

Most customers will need to order the 1-1/8" or 1-1/4" Max OD drive roller.

The 7/8" drive roller is good for riders over 250 lbs and / or if you have lots of hills with a top speed of about 22 mph. Mostly used with engines 1.10 HP and Higher.

The 1" drive roller is good for riders up to 200 lbs and some hills top speed is about 25 - 27 mph. Mostly used with engines 1.10 HP and Higher.

This kit:
The 1-1/8" drive roller is the standard and most common size for riders up to 280 lbs with mostly flat ground that want a fast top speed about 30 mph. Mostly used with engines 1.60 HP and Higher.

The 1-1/4" drive roller and for riders 165 lbs or less and mostly flat ground 33+ mph. Mostly used with engines 1.60 HP and Higher.

The 1-3/8" drive roller and for riders 150 lbs or less and mostly flat ground 37+ mph. Mostly used with engines 2.0 HP and Higher.

Honda GX35 35.8 cc 1.60 HP Four Cycle - 4 Stroke engine Kit



 FDR-398-1-1/8 Tanaka PF-4000 39.8 cc 2.2 hp, Two Cycle Engine.

This Bicycle engine - motor kit has the 76 mm clutch rotor - 78 mm clutch drum and can be ordered with four sizes drive rollers.

The most common size for this engine is: 1-3/8".

This is a complete Rear mount friction drive kit with a 1" Drive roller that will mount to most Bicycles.

The kit includes:

One: TANAKA PF-4000 39.8 cc 2.20 hp Two Cycle Engine (made in Japan) mix ratio is 50 to 1, includes engine manual and spark plug wrench.

One: Custom made 60" long throttle cable with the small lever & #16 mini hose clamp.

Four: 8” long Black Nylon ties to secure the throttle cable and stop switch wire to the frame.

One: Remote push button stop switch with connecting end (s).

Two: ¼” x ¾” x 15” long Aluminum flat bar, CNC machined and Black Anodized.

One: Alloy Skewer - Quick Release, 5m -.80 x 161mm with channel spacers and hardware.

One: "U" Bracket with backer plate, zinc plated with hardware

Four: 6mm x 1.0 x 45 mm Hex Head Bolts.

One: Engine spacer 3” OD, steel, zinc plated.

One: 76 mm Clutch Drum with 3/8-24 right hand threads.

One: 5/16" Flat Washer - used as a spacer between the bearing and clutch drum.

One: 1/4" thick Aluminum Extrusion channel that is CNC machined and Anodized Black.

(not a bent thin piece of steel like the others that have tried to copy my product )

Two 5/8” ID x 1-3/8" OD x 7/16" wide High Speed Double Sealed Ball Bearings with retaining ring.

We use one High Speed Double Sealed Ball Bearing on each side of the Drive Roller to support it and remove all the pressure off the engine.

Most customers will need to order the 1-3/8" or 1-1/2" Max OD drive roller.

What Drive Roller should I pick?

Remember, the smaller OD of the Drive roller the slower your top speed, but more low end pulling or hill climbing power.

The larger OD of the Drive roller the Faster your top speed, but less low end or hill climbing power.

The 1" drive roller is good for riders up to 300 lbs and some hills top speed is about 25 - 27 mph. 5th most common size for this engine / hp.

The 1-1/8" drive roller and for riders up to 275 lbs with mostly flat ground that want a fast top speed about 30 mph. 4th most common size for this engine / hp.

The 1-1/4" drive roller and for riders 250 lbs or less and mostly flat ground 33+ mph. 2ndmost common size for this engine / hp.

The 1-3/8" drive roller and for riders 225 lbs or less and mostly flat ground 35+ mph. Most common size for this engine / hp.

The 1-1/2" drive roller and for riders 200 lbs or less and mostly flat ground 37+ mph. 3rdmost common size for this engine / hp.