RADIATION PROTECTION
Anti radiation - Radiation Protection Products & Services
SILESIA GROUP INC. , USA CONTACT
http://www.biznetmall.com/antiradiation/

Home Page
About Radiation Cloth - Apparel
Phones
Computers
Fabric FAQ
Other Products

EMF Shielding & Conductive Paints

Best selection, great prices on High Conductivity Paints, Coatings and Inks using Silver, Copper and Nickel

Y-shield

Y-SHIELD

YShield High Frequency Shielding Paint

Easy to apply water-based paint for walls, ceilings, doors and other interior OR exterior surfaces. Very effective for blocking cell phone signals, CB, TV, AM, FM signals, radiofrequency radiation and microwaves. Tested highly effective up to 18 GHz!

Based on a high quality pure acrylic binder, this shielding paint offers a perfect compromise of excellent attenuation, high water resistance and good ecology. Good adhesion on many surfaces and substrates like latex paint, construction boards, cement, plaster, polystyrene, masonry surfaces, etc.


Y-shield Attenuation

Frost-resistant liquid format, ready to use right out of the bottle. Easy to handle – brush, roll, or spray similar to ordinary wall paint - and still achieve an amazing reduction of 99,99% of HF-Radiation with only one layer. Dries quickly. Water clean-up.

Due to its holohedral carbon structure, without fibers or meshes, it offers consistent attenuation regardless of the direction of signal polarization, and a highly conductive surface. As a bonus, carbon is a good RF absorber. About 10% of Y-Shield shielding effectiveness is due to absorption. This helps reduce reflections and minimizes the risk from RF sources trapped inside the shielded area.

15 month long shelf life. Safe for air or ground shipping any time of year.

  • Cover with latex paint, wallpaper, etc. to achieve desired aesthetics
  • Color: black
  • Attenuation: typically 40 dB per layer
  • Resistivity: ~10 Ohm per sq
  • Minimum application temperature: +1°C / 33.8°F
  • Weight: 3.2 lb /liter
  • Typical coverage: 50-100 ft² (~ 5-10 m²) per liter
  • Shelf Life: 15 months, unopended
  • RoHS Compliant
Yshield



Requires grounding like any other RF shielding material. Appropriate for home, industry, research, and educational applications. Can be used for interior or exterior application, overcoat with high hiding latex paint of any color.
Click Here for complete installation instructions (.pdf)
Click Here for MSDS (.pdf)

Important note about conductive paint and the National Electric Code:
The is nothing in the NEC which prohibits painting your walls with conductive paint. However, because this product does NOT carry a UL listing, some electrical inspectors, by virtue of being the “Authority Having Jurisdiction” can require the homeowner to hire an electrical engineer to certify that the product is safe to connect to the electrical ground. They can also require that a licensed electrician perform the ground connection. If your application requires an electrical inspection AFTER installation, you should check with your local inspector BEFORE you proceed to avoid any surprises.

YShield Liquid (Cat. #A290-5L) … $404.77/ 5 liter 

YShield Liquid (Cat. #A290-L) … $89.95/liter 


Y-shield Ground Kit

Ground Kit for Y-Shield


Specially designed for grounding flat surfaces like walls painted with Y-Shield. Provides secure connection. Connect to surface after Y-Shield has dried, but before overcoating. Ground cable included is 40 inches. (Can also be used with CuPro-Cote).

Click Here for complete grounding instructions (.pdf)

Important note about conductive paint and the National Electric Code:
The is nothing in the NEC which prohibits painting your walls with conductive paint. However, because this product does NOT carry a UL listing, some electrical inspectors, by virtue of being the “Authority Having Jurisdiction” can require the homeowner to hire an electrical engineer to certify that the product is safe to connect to the electrical ground. They can also require that a licensed electrician perform the ground connection. If your application requires an electrical inspection AFTER installation, you should check with your local inspector BEFORE you proceed to avoid any surprises.

Ground Kit for Y-Shield (Cat. #A290-Grd) …........ $59.95 



SOCKET TESTER
INCLUDING PROPER GROUND TEST

Check Sockets for Improper Wiring and Faulty Ground!

Socket Tester Including Proper Ground Test You know what happens when we ass-u-me? Electric sockets can be bad for a number of reasons: a wire can short or fray, a wire can become disconnected, or corrode at the contact, or the wires can be connected to the wrong contact altogether! These problems can be a fire hazard, a shock hazard, a problem for polarized appliances, and definitely a problem if you are using the socket’s ground connection to Earth your shielding.

There is no need to guess because it is so easy to test for proper wiring at a socket. Simply plug in the tester and look at the result. Large LCD display indicates if ground is missing or faulty. Easy to see LEDs light up to indicate all these possible problems:

- Voltage on ground connection
- Disconnected Ground
- Disconnected Neutral
- Disconnected Hot
- Interchanged Neutral and Hot
- Interchanged Ground and Hot
- Interchanged Ground and Hot, Neutral missing
- GFI function

This inexpensive tester can be used over and over and gives either peace of mind or a specific earning about what to do. Don’t ground to your socket without it! North American Plug only. Rated for 120V, 50/60 Hz.

Socket Tester Including Proper Ground Test (Cat. #A452) ... $14.95 


CuPro-CoteTM PAINT

Copper Particle Conductivity in a Water Based Paint

CuPro-Cote (STATICVEIL)This is a sprayable, brushable, or rollable conductive metallic coating using a specially formulated copper as the conductive agent for superior performance in electric field and RF shielding. Developed initially as an RFI/EMI shield for plastic electronic equipment housings, it can be applied directly onto acrylic, ABS and structural foams, as well as solvent sensitive materials such as polycarbonate and polystyrene. Can also be applied to other non-porous surfaces including primed wallboard, wood and clean metals. Can be applied by sprayer, brush or roller just like ordinary latex paint! Just as safe to handle, too. Thin with water. Good surface resistivity of <1 Ohm/sq at 1 mil dry film thickness. Attenuation: more than 75 dB from 30 MHz to 1.5 GHz. Dried coating is stable up to 250° F. Covers 670 ft² per gallon per mil thickness if application is 100% efficient (typically 400 ft² per gallon when applied by roller). Color = Glitter Copper, but you can paint over with ordinary latex paint to achieve desired aesthetics. Warning: CuPro-Cote liquid does not tolerate freeze/thaw well. We cannot be responsible for freeze damage during shipping. Click to see MSDS (.pdf) RoHS Compliant.

Click to see equipment and application tips (.pdf)

Important note about conductive paint and the National Electric Code:
The is nothing in the NEC which prohibits painting your walls with conductive paint. However, because this product does NOT carry a UL listing, some electrical inspectors, by virtue of being the “Authority Having Jurisdiction” can require the homeowner to hire an electrical engineer to certify that the product is safe to connect to the electrical ground. They can also require that a licensed electrician perform the ground connection. If your application requires an electrical inspection AFTER installation, you should check with your local inspector BEFORE you proceed to avoid any surprises.

CuPro-Cote Paint (Cat. #A292-5G) .......................... $2269.77 /5 gal 
CuPro-Cote Paint (Cat. #A292-G) ................................. $559.95 /gal 
CuPro-Cote Paint (Cat. #A292-Q) ............................. $199.95 /quart 
CuPro-Cote Paint (Cat. #A292-4) .................................. $39.95 /4 oz 

Click Here For More Information About This Product



Y-shield Ground Kit

Ground Kit for CuPro-Cote


Specially designed for grounding flat surfaces like walls painted with CuPro-Cote. Provides secure connection. Connect to surface after CuPro-Cote has dried, but before overcoating. Ground cable included is 40 inches. (Can also be used with Y-Shield).

Click Here for complete grounding instructions (.pdf)

Important note about conductive paint and the National Electric Code:
The is nothing in the NEC which prohibits painting your walls with conductive paint. However, because this product does NOT carry a UL listing, some electrical inspectors, by virtue of being the “Authority Having Jurisdiction” can require the homeowner to hire an electrical engineer to certify that the product is safe to connect to the electrical ground. They can also require that a licensed electrician perform the ground connection. If your application requires an electrical inspection AFTER installation, you should check with your local inspector BEFORE you proceed to avoid any surprises.

Ground Kit for CuPro-Cote (Cat. #A290-Grd) …........ $59.95 



Nickel Copper Cobalt Fabric Tape

Ni/Cu/Co FABRIC TAPE

"Perfect for Grounding Painted Surfaces!"

Simply apply to surface before painting. Attach free end to known safe ground. Then simply paint right over the tape to achieve ground contact.

High conductivity, high flexibility fabric tape with conductive adhesive. Nickel, Copper, and Cobalt coated nylon ripstop fabric (with anti-fray) offers excellent RF shielding properties (82 dB at 1 MHz) and electrical conductivity (surface resistivity of less than 0.1 Ohms/sq).

Also use it so seal gaps, seams, and edges of shielding fabrics, paints or plastics. Also can be used to create conductive pathways on surfaces or add shielding to cables and flexible conduits. Cuts easily with scissors. Extremely corrosion and tear resistant, -40 to 212°F. Only 0.006 inch thick. 1 inch wide, 25 feet per roll. Click to see complete spec sheet (.pdf)

Nickel/Copper/Cobalt Fabric Tape (Cat. #A225) …… $19.95/roll 

CONDUCTIVE MARKER

Conductive Marker

Draws Highly Conductive Silver Traces

Need a conductive liquid but don't need a whole quart? Use this unique marker to draw real silver conductive lines with precision and control to repair circuits, jump across connections, apply shielding to a small area, or even repair your auto windshield defroster! Valved marker tip for easy application. Can be soldered at low temperatures. Dries quickly with no special equipment. 8.5 grams goes a long way. Perfect for designing prototype circuits too! Air dry in 45 minutes, or heat dry for 5 minutes at 250-300° F. Caution: uses volatile solvents. RoHS Compliant.

Uncured Properties
Trace Width: 1/32" (min.) 1/16" (average)
Resistivity: 0.2 Ohms x mil
Dry Time: 10 minutes at room temperature
Fill: 8.5 grams

Click to see MSDS

Flammable, ships by ground only.

Conductive Marker (Cat. #A280) ….................…… $19.95 


CONDUCTIVE GREASE

Maintain Conductivity Between Moving Parts

Conductive GreaseConductive lubricant containing pure silver provides superior electrical and thermal conductivity, lubrication and protection. Handy syringe dispenser permits precise control and no mess. Effectively lubricates metal, rubber and plastic. Protects against moisture and corrosion. Thermally stable over a wide temperature range. Reduces wear too. 0.23 oz. RoHS Compliant.

Conductive Grease (Cat. #A282) ……. $19.95 


MAGIC WALL

Makes Magnets Stick to Any Surface Magic Wall

A very unique item! Non-toxic, non-flammable, and non-hazardous, you can paint this magnetic paint onto practically any surface that will take a latex paint and then magnets will stick to it. Is your refrigerator door running out of space for notes and pictures? Kids want to hang things on the wall but you don't want the tape/tack marks? Workshop needs more organizing space? Simply paint the wall, ceiling, blackboard, bulletin board, kitchen cabinets (you can topcoat with your favorite latex color) with magnetic paint, then post whatever you like with magnets.

Owes its unique properties to the inclusion of low corrosion iron filings in a water based latex. Brush or roll on. Cleans up easily with water. Bonus: this paint actually provides a slight amount of ELF magnetic shielding! Color is gray, ship weight is about 8 lb. per quart.

Magic Wall (Cat. #A289) ………….....……….… $29.95/ Qt 



PMA Radiation Protection Coating

pmi radiation

PMA Radiation protection Coating is invented by PMA investment organization experts group.

According to warplanes’ invisible coating technology, they re-formula the ferrite absorbing material compatibility recipe and developed a high-tech civil radiation protection product. is a kind of water-solubility green coating that can absorb radiation, therefore, it cleans space, protect human body from radiation hazard and establish a health environment for people.


coating test

anti radiation coating


A few words about phony products on the market...

We are often asked why we don't carry the chips, neutralizers, cutesy bugs, and some other cellphone radiation products that are so heavily marketed on the internet. Our answer is simple and honest: our criteria for including a product in our catalog is that it does what we say it does, and its effectiveness can be demonstrated with an appropriate meter.

Next time you look at one of those other products, ask:

Can its electromagnetic effect be detected with a meter? 
If not, then how can the seller claim that the reported effects on cell cultures, muscle strength testing, plants, skin heating, or other biological effects are due to electromagnetic changes (see http://www.cellphone-health.com/mret-howitworks.htm for example)? Electromagnetic field characteristics are well known and easy to measure. If there is truly an electromagnetic change, that change will be easy to detect and measure.

Does the effectiveness of the product depend on unconventional science? 
We are always open to the idea that there are still many mysteries to solve in science. But ask yourself: if the seller claims his product uses new technology which cannot yet be detected or measured, then how do they know if it is indeed using that technology??

Are the conclusions from the test consistent with the data (and common sense)? 
Look at the test data. One product we saw (http://www.fostac.co.za/test.pdf) was tested by a respected lab using white blood cell counts. The % of viable cells was essentially the same in the control, exposed, and "protected" specimens, yet the conclusion is that the product somehow protected the cells.

Is the seller willing to reveal the test method? 
Thermal image pictures of a face tell you nothing about what went on on the minutes leading up to the photo.

Is the product being tested on a real cellphone when used according to instructions? 
Some products (http://www.safecell.net/reports01.html for example) are tested using a large piece of shielding material in a laboratory test jig. These results will be very different compared to putting a small amount of the same shield on a large transmitter like a cellphone. Think about this: no light will penetrate a penny, but it is silly to think that holding a penny up to the sun will put you in darkness.



 Disclaimer
  • We do not claim any healing properties.
  • If you have any medical problems, please be advised to contact your doctor.
  • All our products are not healing the body; they are helping the body to heal itself.
      We cannot make any medical claims about the use of the products, but the results speak for themselves. Over 98.5 percent of our customers are fully satisfied. That is not 100% - but that is a pretty good number.
  • The information presented on this web site gives general advice on those influences in the built environment that are known to be possible causes of illness. Always consult your health care provider for your individual health care needs and concerns. The information contained on this web site is presented for educational purposes only. It is not intended to be a substitute for informed medical advice or care by a health care provider. You should not use this information to diagnose or treat any health problem or illness without consulting your health care provider.
  • Furthermore, all consultations and recommendations provided by Silesia Group Inc. staff are for the purpose of providing guidelines as an electro-magnetic field (EMF) consultant for clients with electro-magnetic field exposure sensitivity. All electrical wiring systems that are created as a result of these consultations are to be designed and installed by licensed professional electrical engineers and electrical contractors. The services are provided as an EMF consultant only, offering testing, advice and educational support. It is the responsibility of licensed electrical contractors to verify that electrical wiring systems are code compliant.
"These products are not intended to diagnose, treat, cure or prevent any disease.  The Food and Drug Administration have not evaluated these products.  As in all health situations, qualified professionals should be consulted."


 REGULAR MAIL ORDERS FORM:

PRINT THIS PAGE AND SEND PAYMENTS WITH THIS FORM TO
SILESIA GROUP INC., USA TO ADDRESS CONTACT

To order with check or money order by mail, please print this form and choose your products.
Please add Shipping and Handling

ITEM NO AND DESCRIPTION PRICE QUANTITY TOTAL
1 . . .
2 . . .
3 . . .
4 . . .
5 . . .
6 . . .
7 . . .
8 . . .
9 . . .
10 . . .
TOTAL . . .
SHIPPING AND HANDLING . . .
GRAND TOTAL . . .
BUYERS NAME _____________________________________ ADDRESS:___________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
SHIPPING ADDRESS: _________________________________ _____________________________________________________
_____________________________________________________
_____________________________________________________
______________________________________________________
ADDITIONAL COMMENTS & INSTRUCTIONS:
__________________________________________________________

ALL ORDERS ARE SHIPPED AFTER ALL FUNDS WILL BE CLEARED AT OUR FINANCIAL INSTITUTION. SOME ORDERS ARE NOT REFUNDABLE.
ALL SHIPPING OUTSIDE USA NEEDS TO ADD ADDITIONAL SHIPPING FEE.

Biznet Mall
WORLD WIDE SALES NEW DISTRIBUTORS WELCOME
Biznet Mall
All Products Come With 30 Day Money Back Guarantee!
INTERNATIONAL PAYMENTS ACCEPTED,  MONEY ORDERS, CHECKS, INTERNET ORDERS
"These products are not intended to diagnose, treat, cure or prevent any disease.  The Food and Drug Administration have not evaluated these products.  As in all health situations, qualified professionals should be consulted."